Next: About this document
Up: Use of the TN-7200
Previous: The TN-7200 Comes
The following steps should be followed for setting up the TN-7200 for
use:
- Press the SETUP button. Many of the buttons should now be
flashing.
- Press the ACQUIRE button. A menu of choices will appear
on the screen.
- Select PHA by pressing ENTER.
- Set the conversion gain to 1024.
- Set the digital offset to 0.
- Set the live time to 20 (this is the counting time in seconds).
- Set the preset integral to 0.
- Press the SETUP button to stop the setup operation.
- Press the button marked 1/4.
- Press the ERASE DATA button.
- Start an acquisition with the ACQUIRE button.
For further details on using the TN-7200 MCS, please see the
Operator's Manual.